JOB 524 T3 LAB

Description

The JOB 524 T3 LAB multiprocess inverter welding generator meets professional and specialist welding needs and is guaranteed by the LAB mark of excellence. Designed and built with care at our San Marino factories.

It allows to weld in Synergic MIG / Manual MIG / MMA / TIG Lift with great precision.

The JOB 524 T3 LAB model is specially designed for the needs of bodywork welding. The control of the generator is very simple and intuitive. Through the color graphic display in a few steps you can set up the necessary work.

A different welding program is assigned to each of the three torches, which is then automatically recalled by pressing the torch button. In this way the welding machine is ready for use with three different materials: for example aluminum, steel and copper silicon alloy. Each torch is connected to its own 4 roller wire feed unit, reel for wire reels with a diameter of 200 mm and up to two different shielding gases.

The JOB 524 T3 LAB is extremely flexible and easy to use: in synergic MIG mode over 50 programs are preloaded for welding many metals and alloys such as: steel, stainless steel, aluminum and brazing with copper silicon or copper aluminum wires, etc.

Through the SD card it is always possible to update and add new programs. The microprocessor memory also allows you to save customized programs.

MIG welding can be set in PULSED or DOUBLE PULSED mode for special processes or on thin thicknesses where it is important to reduce the heating of the piece and minimize welding spatter.

The structure of the generator is designed with the needs of the coachbuilder in mind and is studied in detail such as, for example, support for the various torches, sturdy rubber wheels, etc.

The JOB 524 T3 LAB can also be used in MMA mode to weld rutile and basic coated electrodes and in TIG Lift mode it is perfect for precision work.

The Job 524 T3 LAB model delivers 200 Amps in direct current. The power supply voltage is single-phase at 230 Volts.

Some of the main features of the JOB 524 T3 LAB are:

MIG

• Robust 4 roller wire feeder diameter 37 mm for each torch.
• Gas test function: to check the operation of the pressure reducer without advancing the wire.
• Wire loading function: to easily load the wire into the torch without gas outlet.
• Coil housing diameter 200 mm.
• Synergic or manual regulation. Independent for each torch.
• Programs recall via torch trigger.
• Preloaded programs for many materials.
• SD Card Reader: to update programs and add new ones.
• Personal program memory.
• Simplified or advanced adjustment menu: to manage all available welding parameters.

Secondary MIG parameters

• Inductance Adjustment: this value can be adjusted to reduce weld spatter.
• Adjustable: Burn Back, Hot Start, Wire approach speed.
• Welding modes: in 2T / 4T / spot / stich.
• Predisposition for use of spool gun or potentiometer torches.

MMA

• Adjustable Arc Force.
• Adjustable Hot Start.
• Automatic Anti-sticking: allows you to easily detach the electrode if it remains glued to the piece.

TIG

• TIG with Lift ignition.

Code: 250100
Equipment:
torch 1 230A 3m (wire Ø 0,8 mm aluminum), rollers (Ø 0,8 / 1,0 mm Al)
torch 2 180A 3m (wire Ø 0,8 mm steel), rollers (Ø 0,6 / 0,8 mm Fe)
torch 3 180A 3m (wire Ø 0,8 mm steel CuSi3), rollers (Ø 0,6 / 0,8 mm Fe)
Arm equipped for torch support, cable with ground clamp, gas hose.