This website uses cookies to give you the best experience. By using this website you consent to the use of the cookies.

OKCLOSECookie policy

MIGA 380

MIGA 380
:

MIG/MAG, NO-GAS, MMA, TIG INVERTER Multiprocess welding system 1Ph - 230V 50/60 Hz
"EASY MIG" Synergic MIG welding
Dati:

Services

Print

Description

MIGA 3 series with 300/200mm wire spool are wheeled singlephase inverter welding machines for MIG/MAG, NO GAS, MMA and TIG welding operations. It is the ideal welding machine for the professional craftsman, who needs different welding processes.
  • MIG SYNERGIC CONTROL:in the MIG synergic welding mode the microprocessor that controls the machine regulates the inductance and other welding parameters.By just selecting the program shown in the help table and the machine is immediately ready to weld.
  • MIGA 3 combines simplicity and compactness with unique features in its segment such as the ability to adjust INDUCTANCE in MIG welding to reduce spatters. ARC FORCE in MMA to reduce the risk of the electrode sticking to the weld pool and SLOPE DOWN in TIG to facilitate the end of the welding bead.
  • Reversed polarity for welding with innershield wire (NO GAS) is a standard feature that makes outdoor welding less complicated. The innershield wire is comprised of welding material and flux that create its own gas shield. This means no need for a gas cylinder.
  • MIGA 3 are ideal to operate on steel, stainless steel and aluminum and MIG braze-welding for galvanized steel.
  • They are also excellent TIG DC LIFT an MMA welding machines with excellent ignition properties and a stable arc. They are suitable for mild and stainless steel welding operations with rutile, basic, inox electrodes, etc.
  • MIG Features
  • Assisted synergic welding.
  • Adjustable electronicinductance.
  • Hot Start.
  • Burn back.
  • MMA Features
  • Hot Start.
  • Adjustable Arc Force.
  • Anti-sticking.

  • Code: 242800
    Equipment: MIG torch 180A 3m EURO (wire 1,0 mm Fe), rollers ( 0,6 / 0,8 mm Fe), cable with ground clamp, gas hose.

    TIG Features
  • TIG with LIFT arc striking (Torch with manual gas valve).
  • Anti-sticking.
  • Adjustable Slope down.

  • Code: 242800
    Equipment: MIG torch 180A 3m EURO (Tip 1,0 mm), rollers ( 0,6 / 0,8 mm Fe), cable 16 mmq with ground clamp (2,7 m), gas hose (1,5 m).

    Features

    Welding current range (Amp):MIG: 10 - 200A
    MMA: 10 - 160A
    TIG: 10 - 200A
    Duty Cycle (Amp) (EN 60974-1 40C):MIG: (180A - 25%) - (100A - 60%)
    MMA: (150A - 25%) - (100A - 60%)
    TIG: (180A - 25%) - (100A - 60%)
    Open circuit voltage (Volt):86V
    Input voltage (50/60 Hz) :1 Ph x 230V
    Absorbed power 60% / Max:2,8 / 4,5 kW
    Fuse (Amp):16A
    Generator:+/- 30% (7 kW)
    Efficiency:>80%
    Wire MIG MAN/SYN::
    Steel wire ( mm): 0,6 - 0,8 - 0,9 - 1,0 mm
    Stainless steel wire ( mm): 0,8 - 1,0 mm
    Al.Mg - Al.Si wire ( mm): 0,8 - 1,0 - 1,2 mm
    Cu.Si 3 - Cu.Al 8 wire ( mm): 0,8 - 1,0 mm
    Self shielded wire (mild teel) ( mm): 0,8 - 0,9 - 1,0 - 1,2 mm
    Wire Suitable Spool: 200 - 300 mm
    ELETCTRODES ::
    Rutile: 1,6 - 4,0 mm
    Basic: 1,6 - 4,0 mm
    TIG: 1,0 - 4,0 mm
    Wire feeder:2 rollers (30 mm)
    Thermostatic Protection:yes
    Weight kg ≅:30 kg
    Dimensions (mm):775 x 400 x 790
    FEATURES::
    Manual welding:yes
    Synergic welding:MIG/MAG, NO GAS
    Electronic inductor:MIG/MAG, NO GAS - Adjustable
    Burn back:MIG/MAG, NO GAS
    Hot start:MIG/MAG, NO GAS, MMA
    Arc Force (MMA):Adjustable
    Anti-sticking (MMA/TIG):yes
    TIG Lift (Torch with gas valve):yes
    Slope Up:TIG
    Slope Down:TIG - Adjustable
    LOGISTIC INFO CODE:242800
    Barcode:8011399035469
    Package weight kg:0
    Pieces for pallet:0
    Point
    Ready Pro ecommerce
    ^