This website uses cookies to give you the best experience. By using this website you consent to the use of the cookies.

OKCLOSECookie policy



MIG/MAG, NO-GAS, MMA, TIG Multiprocess welding system 1Ph - 230V 50/60 Hz
"EASY MIG" Synergic MIG welding




The MULTIPROCESS inverter welding generator Easy JOB 525 LAB is versatile and very simple to use. It meets professional and specialist welding needs and is guaranteed by the LAB mark of excellence. Designed and built with care at our San Marino factories.

The exclusive EASY MIG FULL SETTING interface allows you to weld in Synergic MIG / Manual MIG / WIRE No Gas / MMA / TIG Lift.

In synergic MIG mode, it makes it easy to weld many metals such as: steel, stainless steel, aluminum and braze welding with copper silicon or copper aluminum wires.

In MMA mode it allows the welding of rutile and basic coated electrodes.

In TIG Lift mode it is perfect for precision work.

The Easy JOB 525 LAB model delivers 250 Amps in direct current. It houses wire spools with diameters of 200 mm and 300 mm. The MIG torch is equipped with a EURO quick coupling. Rear housing supports 4 m3 cylinders. The body is designed with professional users in mind and with attention to detail such as, for example, sturdy rubber wheels, torch holder, accessories compartment, etc.

The power supply voltage is single-phase at 230 Volt.

Through the main command FULL SETTING in addition to selecting the welding process, it is possible to adjust other important parameters to always obtain an excellent result.

Some of the main features:

  • Synergic MIG: extremely simple adjustment of the system.
  • MIG Inductance Adjustment: ("Full Setting" command) this value can be adjusted to reduce welding spatter.
  • Adjustable MMA Arc Force: ("Full Setting" command) to obtain an optimal welding with each electrode it is possible to adjust the temporary increase of the current when the electric arc becomes short.
  • Automatic MMA Hot Start: facilitates arc striking.
  • TIG LIFT: arc striking occurs by touching the piece with the electrode and slowly lifting it. The risk of contaminating the workpiece with the tungsten electrode is small.
  • Automatic TIG Slope up: progressive increase of the welding current to obtain a flawless start of the weld seam.
  • Adjustable TIG Slope down: ("Full Setting" command) decrease of the welding current to obtain a flawless weld seam end.

Code: 242200
Equipment: MIG torch 230A 3m (wire 0,8 mm Fe), rollers ( 0,6 / 0,8 / 1,0 / 1,2 mm Fe), cable with ground clamp, gas hose.


Welding current range (Amp):MIG/MAG, NO GAS, TIG: 10 - 250A
MMA: 10 - 200A
Duty Cycle (Amp) (EN 60974-1 40C):MIG/MAG, NO GAS, TIG: (220A - 20%) - (120A - 60%)
MMA: (180A - 25%) - (120A - 60%)
Open circuit voltage (Volt):96V
Input voltage (50/60 Hz) :1 Ph - 230V
Absorbed power 60% / Max:3,3 / 6,3 kW
Fuse (Amp):25A
Steel wire ( mm): 0,6 - 0,8 - 0,9 - 1,0 - 1,2 mm
Stainless steel wire ( mm): 0,8 - 1,0 mm
Al.Mg wire ( mm): 0,8 - 1,0 - 1,2 mm (Al.Mg 5)
Al.Si wire ( mm): 1,0 - 1,2 mm (Al.Si 5)
Cu.Si 3 - Cu.Al 8 wire ( mm): 0,8 - 1,0 mm
Self shielded wire (mild teel) ( mm): 0,6 - 0,8 - 0,9 - 1,0 - 1,2 mm
Wire Suitable Spool: 200 - 300 mm
Rutile: 1,6 - 4,0 mm
Basic: 1,6 - 4,0 mm
TIG: 1,0 - 4,0 mm
Wire feeder:2 rollers
Output connection:DX 50 mm2 / Euro
Thermostatic Protection:yes
Synergic welding:MIG/MAG, NO GAS
Electronic inductor:MIG/MAG, NO GAS - Adjustable
Arc Force (MMA):Adjustable
Anti-sticking (MMA/TIG):yes
TIG Lift (Torch with gas valve):yes
Slope Down:TIG - Adjustable
Weight kg ≅:30
Dimensions:775 x 400 x 790
Package dimension, Wid.-Dep.-Height (mm):800 x 305 x 650
Package weight kg:34
Pieces for pallet:8
Ready Pro ecommerce