MIGA 200

MIG / NoGas / MMA: 10÷150Amp (230V).
MIG EASY-MIG – Spool Ø 100mm.
For light duty.

Code: 230000

SKU230000 CategoriesWELDING AND CUTTING, MULTIPROCESS, INVERTER

MIGA 200 is a single-phase inverter welding machine, suitable for MIG/MAG, NO GAS and MMA welding operations.
With 3 always available welding process it is ideal for repair work and small constructions.

MIGA 200 is not only simple, but it also has a welding quality that is typically found in more advanced products.
MIGA 200 delivers 150 Amp direct current (DC). The power supply voltage is single-phase 230 Volt. It has low energy consumption and can be used with reduced installed power (3 kW) or connected to a motor generator (see technical data table).
Extremely light and compact: It holds 100mm diameter wire spools.

MIGA 200 is the ideal choice for MIG welding on steel, stainless steel, aluminum, and galvanized steel.
The change of polarity allows you to use a NO GAS cored wire. The cored wire has a substance inside that provides gaseous protection, making welding very simple without the need for a gas cylinder, particularly when working outdoors.

The control panel is easy to use: select the wire speed and welding voltage, and it is ready to be used. The SYNERGIC CONTROL sets the inductance and other welding parameters automatically.

In MMA welding mode, the MIGA 200 can weld rutile and basic electrodes with diameters ranging from 1.6 to 3.2mm, with excellent arc striking and stable arc. Mild steel and stainless steel can be welded with this.

Equipment: MIG torch 110A 2m (Tip Ø 1,0mm), rollers (Ø 0,9mm Flux / Ø 0,6mm Fe), Cable with ground clamp (1,7m).

Technical data

DATA SHEET	TITOLO
Process	MULTIPROCESS
Technology	INVERTER
Standard
Mains voltage 50/60 Hz	1 X 230V ± 30%
Absorbed power 400V Min / Max
Absorbed power 60% – MAX	1,6 – 2,5 kW
Maximum power absorbed 230V (I1max)
Mains current effective 230V (I1max)
Fuse	16A
Power factor: Cos phi
Minimum generator size	4 kWA
Efficiency	> 80%
Power open circuit
WELDING PERFORMANCE	PARAGRAFO
MIG Current rate	10 – 150A
MIG Duty cycle Max current (40°)	110A @ 25%
MIG Duty cycle 60% (40°)	70A
MIG Duty cycle 100% (40°)
MMA Current rate	10-130A
MMA Duty cycle Max current (40°)	100A @25%
MMA Duty cycle 60% (40°)	60A
MMA Duty cycle 100% (40°)
TIG Current rate
TIG Duty cycle Max current (40°)
TIG Duty cycle 60% (40°)
TIG Duty cycle 100% (40°)
Open circuit voltage	100V
MIG 230V Welding current range
MIG 230V Duty cycle MAX (40°)
MIG 230V Duty cycle 60% (40°)
MIG 230V Duty cycle 100% (40°)
MIG 230V Open circuit voltage
TIG 230V Current range
TIG 230V Duty cycle (40°) MAX
TIG 230V Duty cycle (40°) 60%
TIG 230V Duty cycle (40°) 100%
MMA 230V Welding current range
MMA 230V Duty cycle (40°) MAX
MMA 230V Duty cycle (40°) 60%
MMA 230V Duty cycle (40°) 100%
Open circuit voltge:V (230V)
WELDING WIRES / ELECTRODES	PARAGRAFO
Wire steel, (Ø mm)	0,6 – 0,8 – 0,9
Wire inox, (Ø mm)	0,8
Wire Al.Mg 5, (Ø mm)	0,8 – 1,0
Wire Al.Si 5, (Ø mm)	0,8 – 1,0
Wire Cu.Si 3, (Ø mm)	0,8
Wire Cu.Al 8, (Ø mm)	0,8
Wire flux cored (steel), (Ø mm)	0,8 – 0,9 – 1,0
Rutile electrode, (Ø mm)	1,6 – 3,2
Basic electrode, , (Ø mm)	1,6 – 3,2
TIG electrode, , (Ø mm)

Features

CHARACTERISTICS	TITOLO
Portable
With wheels
Wire spools	100
Protection class
Display
LCD colour display
Wire feeder	2 X D.25 mm
Reversed polarity for flux wires
Direct torch
EURO torch connector
Selenoid valve
Output connections	DX 25 mmq
SD card reader
Gas bottle trolley
Fan cooling
Thermostatic protection
Spool gun torch
Torch with potentiometer
Specifically suitable for generator
Weight and Dimention	PARAGRAFO
Weight approx kg	8,00
Dimensions L x W x H mm	367X166X337
LOGISTIC DATA	TITOLO
Barcode	8011399034868
Package dimension: L x W x H mm	395X175X350
Package weight kg:	8,96
Pieces per pallet:	48

Functions

FUNCTIONS	TITOLO
Synergic welding
Assisted synergic welding
Easy MIG Full Setting
Standard package of welding programs
User jobs programs storage
Pulse welding
Double pulse welding
Automatic detection of the torches
Adjustable Pre gas – Post gas
MIG Approach wire speed
MIG Adjustable Slope up, Slope down
MIG Hot start
MIG Adjustable Hot Start
MIG Adjustable electronic inductance
MIG Electronic inductance
MIG Crater filler control
MIG Burn back
MIG Adjustable Burn back
2T / 4T
Spot (t. On)
Stitch (t. On + t.Off)
Wire loading
Gas test
Welding Amp / Volt
MMA Hot start
MMA Adjustable Hot Start
MMA Arc Force
MMA Adjustable Arc Force
MMA Anti-sticking
TIG Lift
TIG Anti-sticking
Adjustable Slope Down