The Dent Puller SW 18 LAB is the ideal tool for repairing dents and straightening thin sheet metal (bonnets, doors, headliners, etc.).
It offers different functions for many uses in the body shop. Ideal for working on steel, stainless steel and galvanized sheets.
SW 18 LAB delivers 3200 Amp and, thanks to its low energy consumption, it can operate with a 230V single-phase power supply.
SW 18 LAB allows use as a single point and sheet heater.
Easy to use: the adjustment of the spotting time is indicated in a help table
The welding point is controlled through the gun trigger to ensure point accuracy.
The quick coupling for fast changing tool speed up the work.
Code: 273000
Equipment: gun with 2m Cable, ground Cable, spot mass, percussion hammer, tooling for three-pointed washer, three-pointed washers (3 pc)
SW 18 LAB
Dent puller 230V/1Ph – Output 3200A – Dent pulling and straightening out of steel components.
Technical data
| DATA SHEET | TITOLO |
| Process | DENT PULLER |
| Technology | TRADITIONAL |
| Standard | |
| Mains voltage (U1N) 50/60 Hz | 1 X 220 – 240V |
| Power 100% (Sp) | |
| Power 50% (S50) | |
| Absorbed power at 50% / 100% | 1,5 / 3,0 kW |
| Fuse | 16A |
| Power factor: Cos phi | |
| WELDING PERFORMANCE | PARAGRAFO |
| Current range (I2 MAX) | 3200A |
| Open circuit voltage Min/Max (U20), V | 5,8V |
| Current range (I RMS) | 1600A |
| Current MIN (I2cc min imp) | |
| Current MAX (I2cc max imp) | |
| Duty cycle 100% (I2p) | |
| Distance between the arms (e), mm | |
| Arms length (L), mm | |
| Maximum force to the electrodes: (short arms / long arms) (Fmax), N | |
| Miniumum force to the electrodes (Fmin), N | |
| Compressed air: maximum pressure (P1), bar | |
| Compressed air: force: maximum force to the electrodes (P2), bar | |
| Duty cycle MAX | |
| SPOT Welding capability | |
| SPOT Spots/hour (0,8 + 0,8 mm), N° | |
| SPOT Spots/hour (3 + 3 mm), N° |
Features
| CHARACTERISTICS | TITOLO |
| Portable | |
| With wheels | |
| Weldable metals | Steel. Inox, Galvanized steel |
| Display | |
| Pressure reducer on board | |
| Pneumatic gun X: air pressure | |
| Pneumatic gun X: cable | |
| Dent puller contact gun | |
| Dent puller trigger gun | 50mmq / 2m |
| Dent puller quick connector gun | |
| Earth cable | 50mmq / 1,6m |
| Trolley with arm | |
| Table with welding parameter | |
| Water cooling unit available | |
| Copper transformer | |
| Thermostatic protection | |
| Weight and Dimention | PARAGRAFO |
| Weight approx kg | 16,6 |
| Protection class | |
| Dimensions L x W x H mm | 315x186x258 |
| LOGISTIC DATA | TITOLO |
| Barcode | 8011399033557 |
| Package dimension: L x W x H mm | 400x205x335 |
| Package weight kg: | 19 |
| Pieces per pallet: | 40 |
Functions
| FUNCTIONS | TITOLO |
| Power setting | |
| Time setting | |
| SPOT Synergic | |
| SPOT Pulse | |
| SPOT Sure Spot | |
| SPOT Single side spot | |
| PULLER Single spot welding | |
| PULLER Pulsed spot welding | |
| PULLER Continuos spot welding | |
| PULLER Carbon heathing electrode |
