D-MIG 650 TD LAB

D-MIG 650 TD LABD-MIG 650 TD LABD-MIG 650 TD LAB
:

MIG/MAG welding system 3 Ph - 230/400V 50/60 Hz
"SIMPLE WELD" Synergic MIG control facilitates the adjustment of the welding machine
Dati:

Services

Print

Description

D-mig 650 TD LAB

It meets the needs of intensive welding of the craftsman and small industry and is guaranteed by the LAB mark of excellence. Designed and built with care at our factories in San Marino.

Risponde alle esigenze di saldatura intensiva dell'artigiano e della piccola industria ed garantita dal marchio d'eccellenza LAB. Progettata e realizzata con cura presso i nostri stabilimenti di San Marino.

The Simple Weld synergic digital control makes the welder's job easier. It is sufficient to set one of the simergic programs through the control panel and the microprocessor manages the wire speed, the initial ramp and the burn back in synergy with the other settings of the welding machine.

The D-mig 650 TD LAB adjustment is very simple and allows you to weld many metals such as: steel, stainless steel, aluminum etc.

The D-mig 650 TD LAB delivers 500 Amps and can receive wires with a diameter from 1.2 to 1.6 mm. The power supply voltage is three-phase at 230/400 Volt.

The main features of the D-mig 650 TD LAB model are:

  • Synergic or manual welding.
  • Ammeter and digital voltmeter.
  • Welding in 2T / 4T mode.
  • Continuous welding, spot, stich.
  • Sub-menu for adjusting the secondary parameters: burn back, soft start ramp, pause time in stich mode.
  • It houses wire spools with a diameter of 200 - 300 mm.
  • Wire feeder with 4 geared rollers diameter 30 mm.
  • Torch with EURO connection.
  • Thermostatic protection.
  • Forced ventilation.
  • Trolley with front and rear wheels, rear cylinder holder for 50 L cylinders.
  • Torch holder.

Code: 263400
Equipment: MIG torch 340A 3m (wire 1,2 mm Fe), rollers ( 0,8 / 1,0 / 1,2 / 1,6 mm Fe), torch holder, cable with ground clamp, gas hose.

Features

Welding current range (Amp):30 - 500A
Welding positions (N):21
Duty Cycle (Amp) (EN 60974-1 40C):410A - 33%
310A - 60%
Open circuit voltage (Volt):17 - 49V
Input voltage (50/60 Hz):3 Ph - 230/400V
Absorbed power 60% / Max:10 / 16 kW
Fuse (Amp):50 / 32A
Steel wire ( mm): 0,8 - 1,0 - 1,2 - 1,6 mm
Stainless steel wire ( mm): 0,8 - 1,0 - 1,2 - 1,6 mm
Al.Mg - Al.Si wire ( mm): 1,0 - 1,2 - 1,6 mm (Al.Mg 5 - Al.Si 5)
Self shielded wire (mild teel) ( mm): 1,2 - 1,6 mm (MANUAL)
Self shielded wire (mild teel) ( mm):1,2 - 1,6 (With gas)
Wire Suitable Spool: 200 - 300 mm
Wire feeder:4 geared rollers
Output connection:DX 70 mm2 / Euro
Thermostatic Protection:yes
Weight kg ≅:122
Dimensions (mm):877 x 540 x 1025
FEATURES::
Manual welding:yes
Synergic welding:yes
Synergic / Simple Weld:yes
2T / 4T:yes
Spot:yes
Stitch:yes
Soft Start:yes
Burn back:yes
Ammeter / Voltmeter:yes
LOGISTIC INFO CODE:263400
Barcode:8011399026214
Package dimension, Wid.-Dep.-Height (mm):820 x 410 x 805
Package weight kg:122.5
Pieces for pallet:5

Optional accessories

Invoice software
^