SM C36LT CANBUS
|Automatic battery chargers with program for charge conservation (pulse recharge)|
|Battery 12 Volt, 1,2 > 75 Ah|
Automatic battery chargers with program for charge conservation (pulse recharge).
- Suitable for charging lead batteries: Automative Lithium (LiFePo4), WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop.
- Multi step charging: the batteries are charged by applying sophisticated multi-step programs.
- High efficency: "I-U" Charging characteristic (constant current - constant voltage) minimises battery charging time.
- Maintenance Function "Pulse Maintenance": can remain connected to the battery for a long time. Keeps the battery ready for use through the pulse charge.
- Safety guaranteed: Designed to protect vehicle electronics. Non-sparking.
- Reverse polarity protected and short-circuit proof.
- Lightweight and compact battery charger.
Built for outdoor use.
CANbus systems compatible.
4/5 Steps charging program.
Battery, starter and alternator tester
4 Operation modes
WET, GEL, AGM Batteries:
- Bike: 0,8 Amp - 14,4 Volt
- Car: 3,6 Amp - 14,4 Volt
- max 30 Ah: 0,8 Amp - 14,4 Volt
- max 75 Ah: 3,6 Amp - 14,4 Volt
Code: 302400with connector on the cables and clamps
Equipment: supplied with an adapter to be permanently connected to the motorbike batteries.
|Input Voltage (Volt 50-60Hz AC):||1 Ph - 230V|
|Nominal battery voltage (Volt):||12V|
|Voltage limitation (Volt):||14,4V|
|Average charging current (Amp):||0,8 - 3,6A|
|Battery capacity (Ah min/max):||1,2 - 75Ah|
|Battery types:||Automotive: Lithium (LiFePO4)|
Automotive: Pb (WET - AGM - GEL)
|Protection degree (IP):||IP65|
|Weight Kg ≅:||0.65|
|Dimension, Wid.-Dep.-Height (mm):||48 x 90 x 236|
|LOGISTIC INFO CODE :||302400|
|Package dimension, Wid.-Dep.-Height (mm):||280 x 160 x 60|
|Package weight kg:||0.9|
|Pieces for pallet:||320|